Cable Junction for Juiced e-bike

Cable Junction located just below the handlebar. Compatible with both Juiced Crosscurrent and Crosscurrent S.

This is the small piece that the e-brake and display and (if present) the throttle all connect into. It then connects to the (hidden) controllor. 

These connectors are known to be problematic in weather. If your Juiced e-bike is playing up, such as going when it shouldn't, or only sometimes giving power, or the LEDs on the display are blinking, first unplug these and inspect for any corrosion (usually green in colour). Clean out with Corrosion X or similar consumer product. We recommend using heat shrink over these connectors

There are two types of these cable junctions. One has 3 cables and one has 4 cables. If you have a throttle, you must use the 4 cable one. If you do not have a throttle, you can use either.